194 Adapter Harness
August /2014
I had some dead 194 bulbs laying around, so I turned them into useful adapters.
February 28/2016
I am adding some LED's to the car, and want them powered by the dome light circuit. To make this "plug-n-play", I made an adapter harness that plugs into the dome light socket in the front kick panels.
| Parts
Needed (per harness) |
||
| Qty |
Part |
Notes |
| 1 |
194 adapter
w/ 5" of wire |
homemade |
| 1 |
194 bulb
socket w/ 1" of wire |
junkyard |
| 1 |
18/2 wire,
2" long |
had |
| 2 |
1/8" shrink
tube, 1/4" long |
had |
| 2 |
3/16" shrink
tube, 1" long |
had |
| 1 |
16-14 male
q/c
terminal |
had |
| 1 |
16-14 female
q/c
terminal |
had |
The parts layed out.
1 harness.
All done. I added a piece of shrink tubing to the male connectors.
If you have any comments, suggestions, or see any errors, please let me know..... cbradley@telus.net
Last updated on February 28/2016
All contents on this site
are
property of Chris Bradley. No content on this site may be reproduced
without the express permission of Chris Bradley.