Transmission Cooler
Trans
Cooler Install Procedures |
||
Step |
Action |
Notes |
1 |
open hood |
|
2 |
remove
headlights |
|
3 |
un-plug
foglights |
|
4 |
remove bumper |
|
5 |
remove cooling
fans |
|
6 |
remove air
intake hose |
|
7 |
remove old cooler lines from
radiator |
|
8 |
cut cooler hose 6" from the
factory crimp |
|
9 |
remove and discard hoses from
your cut to the radiator |
|
10 |
install plugs in radiator |
|
11 |
install fittings (45*, 3/8" barb
to 6an male) to hoses |
|
12 |
mount cooler |
|
13 |
assemble new hoses |
|
14 |
route and install new hoses |
|
15 |
start vehicle and test for leaks |
|
16 |
top up trans fluid as needed |
|
17 |
reverese steps 6, 5, 4, 3, 2 and 1 | |
If you have any comments, suggestions, or see any errors, please let me know..... cbradley@telus.net
Last updated on August 13/2017
All contents on this site
are
property of Chris Bradley. No content on this site may be reproduced
without the express permission of Chris Bradley.