USB/3.5mm Outlet
May 8/2022
The making of an auxiilliary outlet for the 3.5mm audio and 2nd USB plugs on the Kenwood DDX9707S.
Where I will mount a USB/3.5mm outlet (left side of the glovebox).
The USB/3.5mm outlet. Axxess AXUSB35-SKT.
May 15/2022
Plastic enclosure for the USB/3.5mm outlet; Hammond Mfg #1593QBK from RP Electronics.
The enclosure all done and ready to be screwed together.
I used Bondic to hold the outlet to the enclosure.
Two sided tape on the back.
The hinged cover will bind when the enclosure is mounted, so I trimmed off the hinges.
All done and ready to go in the car.
If you have any comments, suggestions, or see any errors, please let me know..... cbradley@telus.net
Last updated on May 15/2022
All contents on this
site
are
property of Chris Bradley. No content on this site may be reproduced
without the express permission of Chris Bradley.