I had the day off, so I spent a few hours messing with the Bronco.
I borrowed this from my dad. I was hoping that I could crack a few of
the body bolts with the impact gun, but my attempts were futile.
Here is what is left of the drivers side floor.I already had a patch where the dimmer switch was, but
now I'll have to make a larger patch. I spent about 15 minutes scraping all the dirt and debrit out of
there. You can see the two holes where dirt got in; why did Ford leave such large holes?????
This is how much dirt was crammed in there.
I cleaned out the passenger side last time;
the floor rot isn't as bad as the other side.
I jacked the body up enough to get a piece of wood under this crossmember
to take some weight off the right rear body mounts while I was working.
I ground the head off the bolt and pounded it through from the top,
then I put some wood in place of the bushing to support the body.
What is left of the right rear mount.
If you have any comments, suggestions, or see any errors, please let me know..... cbradley@telus.net
Last updated on September 13/2009
All contents on this site are
property of Chris Bradley. No content on this site may be reproduced
without the express permission of Chris Bradley.